Manufacturers

Home>Detailing Parts>Locomotive Antenna Stands

Locomotive Antenna Stands

Locomotive Antenna Stands


£5.99

BLMA

BLMA-92



This set features four extremely common antenna stands. Each set of antennas has the proper Sinclair antenna style (four in the regular length and four of the shorter length). A drilling template is included for easy drilling and mounting of all of the antenna stands. .

Installation Instructions
1.  Remove the antennas from the etched frame using a sharp hobby knife.
2.  Locate the style of antenna(s) you will use on your project and notice that a drilling template is provided for each style.  Consult a reference photo(s) for proper placement of the antenna(s).
3.  Tape the drilling template in place and drill the holes using a #80 drill bit.
4.  Fold the legs of the antenna perpendicular to the center and mount into the holes drilled in step three.
5.  For antenna stands A & D, it is necessary to glue the large flat plate onto the stand once the stand is mounted.  Use the center hole to on both the stand and large flat piece to center everything.
6.  Mount either the regular length Sinclair antenna or the short length antenna through the hole in the center of the stand.
7.  Paint the stand as appropriate.  We recommend painting the Sinclair antenna silver for a better effect.